Archives

2021

Ultimate Guide On How To Use Shark Nv360

Currently, the Shark NV360 vacuum is a familiar product and has become popular in almost every home. A suitable vacuum cleaner will help you protect the value of your home in the best way. But in fact, many consumers still do not know how to use the NV360 properly. To fully exploit the features of the machine as well as how to use it, please continue to follow our article!

Notes before operating the vacuum cleaner

It is recommended that you read all enclosed instructions before operating the Shark navigator 360 in the best way. In addition, to reduce the risk of fire or electric shock, when you use the device, observe the following precautions:

• Do not handle the plug or the vacuum cleaner with wet hands.
• Only Shark-branded filters and accessories should be used instead.
• Do not use the machine to suck large, hard or sharp objects.
• Unplug the power cord when not in use and before servicing or cleaning.

How to use the Shark vacuum NV360

Update mode

Steps to assemble before use

Step 1:

Start placing the nozzle position on the surface to be cleaned. Next, align the hole in the Lift-Away housing with the suction nozzle. Next, lower the cover until it clicks into place.

When attaching the nozzle, ensure that the latch mechanism is securely locked in place to ensure the electrical connection is made.

Step 2:

At the tube position on the back of the Lift-Away case, attach the end of the extension wand until the sound is matched.

Step 3:

Pull the accessory holder located opposite the upper coil over the extension wand. Align the groove and push down.

Using

• Press the ON/OFF switch to Suction Only position (I) to vacuum bare floors or to position (II) to use a circular brush to vacuum carpets.
• Gently press down on the floor nozzle with your foot while you grasp the handle and tilt it towards you.
• When you are done vacuuming, turn off the machine by pressing the O button.

Lift-away mode

Steps to assemble before use

Step 1: When you want to detach the portable Lift-Away box, you can press the red button on the side of the case.

Step 2: Press the handle release button, pull the handle, press the extension wand release button, and pull the extension rod up.

Step 3+4: The location to attach additional accessories is the extension wand or the handle. Press the ON/OFF button to the “I” position to clean the floor. You can hold the handle with one hand; with the other hand, you carry the Lift Away around the house.

Using

• Because the machine has enormous suction power, you need to adjust the suction on the handle.
• If you use the machine on a carpet or curtain surface and the device becomes difficult to push or pull, reduce the suction force by turning the collar counterclockwise to unlock the valve.
• When using the pet power brush, turn the collar clockwise to close the valve.

So we have shared the complete guide to using the Shark Navigator Lift Away Deluxe NV360 upright vacuum. Hope the article will help you use vacuum cleaner products properly and more effectively. From there, it can make the machine work for a long time with the family.

by AntonioAmott on 2021-08-04 01:43:21