allensullivan
How do I make my Ryobi 1600 power washer last for a lifetime
yobi is one of the best manufacturers when it comes to home appliances. They not only offer the best technology, but also design their products intelligently with users’ comfort in mind. One of the most popular products is the Ryobi 1,600 psi 1.2 gpm electric pressure washer. This model is loved for its compact design yet very powerful use. Users worldwide have been using it for their homes, their driveways, as well as cars and trucks.
So if you are an owner of a Ryobi 1,600 power washer and you are looking for ways to maintain it, you have come to the right place. In this article, we will outline the steps it takes to safely use the machine and to ensure its longevity.
Before use
- Oil check-up
A crucial element of the ryobi electric pressure washer 1600 is the oil. Whether you have owned it for a long time or are just using it for the first time, always examine the oil before use to ensure user safety and to protect the machine itself.
If you are a long-term user, look to see if there is any left-over oil from the previous time of use. Left-over oil contains metallic shadings that might have transformed the oil content, which might be damaging to the unit internal mechanics. To drain left-overs, tilt the unit over to one side untilt all the oil is drained out. This might be labour-intensive work, but since this model is lighter than others, it should be easier to do.
Once the old oil is drained, refill the unit with new oil. On the side of the unit is a hole to pour in oil. Remove the dipstick and put in a funnel to pour oil. The recommended oil should be a transparent yellow or gold colour. If the oil is dark-coloured, has metallic shading, or just pitch-black, you need to change to another brand.



- Hose check-up
Attach the high-pressure hose to the unit. Make sure the hose is securely fastened to the pump to prevent any leaks. Check to see if there are any kinks on the hose, which can prevent the flow of water.
- Connect garden hose
The next step is to stick the garden hose to the pump at the back of the unit. Make sure the hose is straightened while getting rid of any kinks that might block water flow. Pull the trigger of the high pressure hose to clear it of any debris and clogged dirt. Even the best pressure washers like this ryobi ry141612 cannot reach its full potential when clogged with small dirt particles. In addition, purging the high pressure hose helps release any amount of air that builds up over time due to lack of use. Air pressure is capable of causing damages greater than you would think. Turn your faucet on all the way and let the water run through for 25 to 30 seconds until it reaches a steady stream. Then, you are good to go.
- Fuel refill
If the fuel level of your 1600 psi 1.2 gpm electric pressure washer is low, refill it with a funnel. As recommended by Ryobi themselves, choose the fuel that is ethanol-free but no more than E10, as ethanol can be damaging to small engines because it causes excessive heat when used for a long time. We meant it when we said Ryobi cared about its users. Do not, also, mix fuel with oil. Using a funnel, slowly pour the fuel in until it is full.
- Unit set up
The buttons and valves need to be adjusted to the right positions before usage.
First, turn the fuel valve to “open” while turning the on/off switch to ON. Second, set the choke lever to full or start position, then you are good to go.
Plug the engine into an outlet to get the unit running. Pull the grip about two or three times to start off the engine. Let it run for several seconds, then switch the choke to the off/ run mode. According to various ryobi pressure washer 1600 reviews, this machine makes considerably less noise than other bulkier and heavier ones.
Plug the engine into an outlet to get the unit running. Pull the grip about two or three times to start off the engine. Let it run for several seconds, then switch the choke to the off/ run mode. According to various ryobi pressure washer 1600 reviews, this machine makes considerably less noise than other bulkier and heavier ones.
After use
- Detergent rinse
As unnecessary chemicals always damage, it is crucial to remove the unit of any detergent once you have completed the cleaning. Take out the soap tank and empty it. Run water through if you need to to make sure there aren't any left-overs.
- Relieve pressure
Before removing the high pressure hose or switch nozzles, you would first need to release the pressure from the hose. Point the hose away from any persons or things to avoid damage as the stream that comes out is extremely powerful. Once again, run water through the spray gun for a couple of seconds to get rid of any small particles that might have got in there while cleaning.
- Add pump protector
This is not required but if you want some extra protection for your Ryobi RY141612 - Ryobi 1600 psi electric pressure washer, buy a bottle of pump protector to add it after use. Simply insert it where you connected the garden hose, then pull the start grip for the unit to absorb the thing.
- Cool off
Let the unit cool off for a couple of seconds before disengaging the parts for storage. This is to make sure that the engine does not undergo excessive heat and to avoid burning your own hands. In the meantime, you can wipe it off with a soft towel to remove any remaining liquid, detergent, or water.

- Storage
Ryobi 1600 psi pressure washer reviews talks highly of the detachable nature of the parts.
Out of the box, the Ryobi 1,600 comes with a garden hose, a soap hose, a pressure washer wand, and the unit itself. The whole thing sells for $99 at Home depot, but many people think it is a worthy investment to make if you are a fan of that shiny and spotless glow of clean things.
The spray gun comes in two parts that helps you break the whole long thing down into compact, storable little parts. The connecting hose is also neatly tied into a circle so that you can put it in a corner. In addition, the unit itself is small to begin with, at just 15 pounds in total, so you can store it in your garage or anywhere that is easily accessible when you need it.
Above is our guide on how to correctly use and maintain the Ryobi 1,600-psi 1.2-gpm electric pressure washer. A lot of people consider it a long-term investment, but without a bit of care, even the best pressure washer in the world cannot last for very long. We hope you have gained some insight into the usage of this model, and don’t forget to share it with your friends if you find this article helpful!
by allensullivan on 2021-01-05 01:40:03
Comments
No comments yet.