Honda Accord Q5 xenon projector retro DIY

I am Zac, I have actually ran my Accord for over 2 years. I really like manual work. I'm likewise while restoring my Honda Accord. Back then of the installation, I made a renovation of the efficiency on the headlight real estate. The primary step was to obtain a set of Q5 Bi-Xenon link projectors from exactly what I bought 2 weeks back.

I began with change the light bottom with HeartRay D2S 5500K HID bulb which I updated in the projector. The factory 8th-generation Accord made use of D2 HID bulb as well as Mitsubishi ballast.

Handled to open the housing, took all parts away: reflector, light bulbs, shadow, mask ... I continued to gauge three indicate make certain the Q5 projector is entirely straightened with the holes. I drilled the openings with D2 guard, this is the image I made it done.

Ok, I obtained it, then it needs to install projector on the interior with screws as well as nuts. It is very important to examine the cutoff line prior to placing the housing. The line should be straight as well as in a proper positioning. When every little thing is right, I installed all up onto my Accord. Check the light once again for the alignment.

I was so ecstatic completed these up. After my DIY retrofit for Q5, I have far better exposure over short and also moderate array, the low-beam cutoff being the only point that makes them much less beneficial over long array.

by automotiveheadlightassembly on 2018-07-04 03:55:14